1

Serial port

Allows you to connect a serial device to the system.

2

iDRAC Enterprise port

Enables you to remotely access iDRAC. iDRAC is very useful for remote management and direct access of the appliance.

3

Ethernet ports (2)
(The port labeled ‘Gb 1’ is the eth0 management port)

Use the Ethernet ports to connect Local Area Networks (LANs) to the system.

4

Full height riser slot

Use the card slots to connect full-height PCIe expansion cards on full height riser.

5

Power supply unit (2)

AC 550 W.
Both power supplies should be plugged in to power to provide redundancy.

6

Ethernet ports (2)

Use the Ethernet ports to connect Local Area Networks (LANs) to the system.

7

USB 3.0 port (2)

Use the USB 3.0 port to connect USB devices to the system. These ports are 4-pin, USB 3.0-compliant.

8

VGA port

Use the VGA port to connect a display to the system.

9

CMA power port

The Cable Management Arm (CMA) power port enables you to connect to the CMA.

10

System identification button

The System Identification (ID) button is available on the front and back of the systems. Press the button to identify a system in a rack by turning on the system ID button. You can also use the system ID button to reset iDRAC and to access BIOS using the step through mode.